H-3 Nozzlenose D

From Inkipedia, the Splatoon wiki
Revision as of 23:03, 27 August 2018 by Heddy (talk | contribs) (add date to time template so that timezone conversion will work)
Splatoon "S" icon.svg
Splatoon 2 "2" icon.svg
Splatoon 3 "3" icon.svg

The H-3 Nozzlenose D is a main weapon in Splatoon and Splatoon 2. It is the Heavy version of the Nozzlenose and the alternative version of S Weapon Main H-3 Nozzlenose.png H-3 Nozzlenose.

Splatoon

H-3 Nozzlenose D

H-3 Nozzlenose D

Basic information
Category Main
Class Shooter
Sub S Weapon Sub Point Sensor.png Point Sensor
Special S Weapon Special Inkzooka.png Inkzooka
Special points
Special depletion Special gauge 40%
Range
68 / 100
Damage
60 / 100
Impact
Fire rate
30 / 100
Charge speed
Ink speed
Mobility
Durability
Handling
Obtainable at
Level 14
Cost Cash 8,300
Requirement
Introduced
Specifications
Weight
Base damage 41
Base duration
Ink consumption 1.6% (4.8% per ZR)
Base range
Rate of fire
Muzzle velocity
Base accuracy
MPU effect
SPU effect
SPU effect
Other variant

The H-3 Nozzlenose D was released on 30 October 2015 at 02:00 UTC.[1] It comes with the sub S Weapon Sub Point Sensor.png Point Sensors and the S Weapon Special Inkzooka.png Inkzooka.

Data

Template:Shooter data

Version history

Version Adjustments
2.2.0
  • Range increased by 15%.
  • Turf coverage increased by 15%.
2.7.0
  • Special gauge loss: 50% → as low as 40%
2.8.0
  • Damage to the Rainmaker shield increased by about 40%

Gallery

Demonstration

Splatoon 2

H-3 Nozzlenose D

H-3 Nozzlenose D

Basic information
Category Main
Class Shooter
Sub S2 Weapon Sub Suction Bomb.png Suction Bomb
Special S2 Weapon Special Ink Armor.png Ink Armor
Special points 190p
Special depletion
Range
70 / 100
Damage
58 / 100
Impact
Fire rate
30 / 100
Charge speed
Ink speed
Mobility
Durability
Handling
Obtainable at
Level 30
Cost Cash 18,400
Requirement
Introduced
Specifications
Weight
Base damage 41
Base duration
Ink consumption 1.8% (5.4% per ZR)
Base range
Rate of fire
Muzzle velocity
Base accuracy
MPU effect
SPU effect
SPU effect
Other variant

The H-3 Nozzlenose D was announced on 16 March 2018 at 09:00 UTC and released on 17 March 2018 at 02:00 UTC.[2] It comes with S2 Weapon Sub Suction Bomb.png Suction Bombs and S2 Weapon Special Ink Armor.png Ink Armor.

Before being officially announced, the H-3 Nozzlenose D appeared in the Version 3.0 preview section of the 8 March 2018 Nintendo Direct.[3]

It is was shown to come with S2 Weapon Special Ink Armor.png Ink Armor. According to the Oatmealdome data mine from August 2017, the H-3 Nozzlenose D would have had S2 Weapon Sub Sprinkler.png Sprinklers as the sub weapon. However, a later update of the data mine showed the weapon with S2 Weapon Sub Suction Bomb.png Suction Bombs, as did the final release.

Data

Template:Shooter data[4]

Version history

Version Adjustments
Base game
  • Movement speed while firing: 0.45 → 0.60
  • Ink recovery cooldown: 30 → 25
  • Increased shot speed by roughly 25%, while not changing shot range.
    • Initial bullet velocity: 23 units per frame → 28.75 units per frame
    • Frames bullet flies straight through the air: 5 → 4
    • Frames in the air before a bullet's damage starts decreasing: 9 → 8
    • Frames in the air where a bullet reaches minimum damage: 25 → 24
  • Decreased duration of weapon sway after jumping by 5/60 of a second.
  • Decreased time required for weapon sway to end once it begins ending by 15/60 of a second.
    • Frame after jumping where outer reticle starts shrinking: 25 frames → 20 frames
    • Frame after jumping where outer reticle finishes shrinking: 70 frames → 50 frames
  • Made it easier to ink the area around your feet.
    • If a paint droplet has not fell within 11 units of the player for 2 shots, the next shot will force a paint droplet to appear at the player's feet.
  • Made it so that accuracy does not decrease even when shooting immediately after a jump.
    • Angle of shot deviation while jumping: 6 degrees → 1 degree
  • Expanded the size of area inked at point of impact.
    • Near droplet paint radius: 19 units → 21 units
    • Far droplet paint radius: 19 units → 21 units
  • Increase in chance to shoot towards the outer reticle per shot: 2% → 1%
  • Range decreased by about 10%.
    • Initial bullet velocity: 22 → 23
    • Frames bullet flies straight through the air: 6 → 5
    • Effective range: 132 units → 115 units
    • Total range: 177.396 units → 160.396 units
  • Ink consumption: 1.6% → 1.8%
  • Droplet rate: 4 → 3
  • Distance between droplets: 48 units → 60 units
  • Droplet paint radius: 14.5 units → 14.2 units
  • Damage to the Rainmaker shield decreased by about 14%: 1.4x → 1.2x
3.2.0
  • Changed the animation when all three shots fired with a single trigger pull hit their target and deal over 100.0 damage in total.
  • Expanded radius of ink coverage when shots hit walls.

Gallery

Demonstration

Quotes

Click to view the quotes for H-3 Nozzlenose D. View the quotation page.

Trivia

  • The Nozzlenose family of weapons are visually designed after garden hose reels. This is also reflected in their names in some other languages.
  • The D in the name likely represents the Dolphin Dolphin sticker on the side.

Names in other languages

Template:Foreignname

Translation notes


References