H-3 Nozzlenose D
The H-3 Nozzlenose D is a main weapon in Splatoon and Splatoon 2. It is the Heavy version of the L-3 Nozzlenose D and the alternative version of H-3 Nozzlenose.
Splatoon
Basic information | |
---|---|
Category | Main |
Class | Shooter |
Sub | Point Sensor |
Special | Inkzooka |
Special depletion | 40% |
Range | |
Damage | |
Fire rate | |
Obtainable at | |
Level | 14 |
Cost | 8,300 |
Specifications | |
Base damage | 41 |
Ink consumption | 1.6% (4.8% per ) |
Other variants | H-3 Nozzlenose Cherry H-3 Nozzlenose |
The H-3 Nozzlenose D was released on 30 October 2015 at 02:00 UTC.[1] It comes with the sub Point Sensors and the Inkzooka.
Data
Version history
Version | Adjustments |
---|---|
2.2.0 |
|
2.7.0 |
|
2.8.0 |
|
Quotes
Sheldon's Introduction
The H-3 Nozzlenose D is an H-3 Nozzlenose decorated with added badges from the manufacturer.
The badges don't actually affect its abilities, but it does include a Point Sensor and the mighty Inkzooka
In the right hands, this interesting combination of abilities may give rise to many unique strategies!
(NA)[a] |
“ | An H-3 Nozzlenose emblazoned with maker's logo. The Point Sensor and Inkzooka make for a completely different battling experience than that of the regular H-3. | ” | — In-Game Description
|
“ | Love your H-3 Nozzlenose but wish that it had a sweet whale sticker on it? Look no further than the H-3 Nozzlenose D! It comes with a Point Sensor and Inkzooka and also we’re pretty sure that the D stands for "Dang! That’s a cool whale sticker!" | ” |
- Notes
- ↑ North America
Gallery
-
Promo image
-
An Inkling running with the H-3 Nozzlenose D
-
Firing the H-3 Nozzlenose D (front)
-
Firing the H-3 Nozzlenose D (behind)
-
Official art of an Inkling holding the H-3 Nozzlenose D
Demonstration
Splatoon 2
Basic information | |
---|---|
Category | Main |
Class | Shooter |
Sub | Suction Bomb |
Special | Ink Armor |
Special points | 220p |
Range | |
Damage | |
Fire rate | |
Obtainable at | |
Level | 30 |
Cost | 18,400 |
Specifications | |
Base damage | 41 |
Ink consumption | 1.8% (5.4% per ) |
Other variants | H-3 Nozzlenose Cherry H-3 Nozzlenose |
The H-3 Nozzlenose D was announced on 16 March 2018 at 09:00 UTC and released on 17 March 2018 at 02:00 UTC.[2] It comes with Suction Bombs and Ink Armor.
Before being officially announced, the H-3 Nozzlenose D appeared in the Version 3.0 preview section of the 8 March 2018 Nintendo Direct.[3]
It is was shown to come with Ink Armor. According to the Oatmealdome data mine from August 2017, the H-3 Nozzlenose D would have had Sprinklers as the sub weapon. However, a later update of the data mine showed the weapon with Suction Bombs, as did the final release.
Quick facts
A.k.a.: H-3
Strengths: Range, turfing, damage, Ink Armor
Weaknesses: requires good accuracy and the ability to lead shots, slow mobility (while firing), very ability dependent
Recommended abilities
Ability | Purpose |
---|---|
Ink Saver (Sub) | Allows more frequent use of Suction Bombs |
Main Power Up | Increases main weapon damage up to 49.9 |
Special Charge Up | Accelerates building up the Special gauge for Ink Armor |
Use
- The H-3 Nozzlenose D is a medium ranged support weapon[6] with a diverse array of abilities.
- It outranges a number of other weapons, such as the Splattershot and the N-ZAP '85, allowing it to both zone them out and turf from a safer distance.
- Its ink coverage and Suction Bombs are very efficient for turfing, which helps maintain map control and quickly build up the special gauge.
- Main Power Up can increase its damage per shot, maxing out at 49.9 with 42 ability points - equal to three mains and four subs - as of Version 4.5.0. 30 ability points – or three mains – are enough to exceed 48.5 hit points of damage.
- As a burst-fire shooter, the H-3 Nozzlenose D requires a higher level of skill than an automatic shooter to be effective:
- Its user must be more accurate with aiming, due to the long delay between bursts.
- A user of any burst-fire shooter has to be able to lead shots in order to maximize the damage per burst.
- The primary weaknesses of the H-3 Nozzlenose D are its slow mobility while firing and long lag between firing bursts:
- While firing, it is less mobile than most slayer's and most other support weapons, which, combined with the lag between firing, can leave it vulnerable to attack.
- The long lag between firing bursts is easy to punish if the H-3 Nozzlenose D is either poorly aimed or mindlessly fired.
- Suction Bombs can be used similarly as Splat Bombs, including clearing areas, such as perches or the Tower, of opponents. However, there are key differences:
- They can attach to surfaces, allowing both more room for error when aiming and the planting of craftier traps, such as underneath a grate.
- They take two seconds after attaching to a surface to detonate, as opposed to one second for a Splat Bomb.
- They inflict more damage from a direct hit and have a larger overall radius of damage.
- Ink Saver (Sub) will reduce the ink consumption per Suction Bomb use. However, a high investment will be required to spam Suction Bombs.
- Ink Armor allows its user's team to either initiate a push, to recapture a Splat Zone for example, or maintain one, such as while locking out the opponent.
- Time the activation of Ink Armor carefully; it takes up to two seconds to activate Ink Armor, which lasts for at least six seconds.
- Try to activate Ink Armor when most or all teammates are active. Slayers, who risk getting splatted more often, benefit from Ink Armor more than anchors do.
- Special Charge Up can hasten the process of building up the special gauge for Ink Armor, particularly to overcome the very high special gauge requirement.
Countermeasures
- Other Ink Armor-based support weapons each have at few advantages over the H-3 Nozzlenose D, including a lower special gauge requirement and less firing lag:
- The Splattershot Jr. has faster turfing and a larger ink tank, the latter which more easily enables bomb spamming.
- The Splattershot Jr., the N-ZAP '85, and the Kensa Undercover Brella all have more mobility when firing than the H-3 Nozzlenose D has.
- The .96 Gal overpowers and slightly outranges the H-3 Nozzlenose D.
- The Kensa Undercover Brella has a shield for protection and Torpedoes for both zoning and distracting opponents.
- Mobile, quick firing weapons, such as the Splat Dualies, once within range, can exploit the H-3 Nozzlenose D's slow mobility and long lag after firing.
- Brellas can pose a problem for the H-3 Nozzlenose D due to the latter's slow mobility and lag between bursts, but beware of Suction Bombs.
- Any long-ranged weapon, such as a charger or most splatlings, can fire upon an L-3 Nozzlenose with impunity. Some of these weapons even outmaneuver an H-3 Nozzlenose D; however, do not allow one to get too close.
- When pursuing a opposing H-3 Nozzlenose D, be wary of any Suction Bomb traps the opponent may have planted, such as around a corner.
- Keep an eye on the HUD to know when the opponent's H-3 Nozzlenose D has Ink Armor ready to use, and both watch and listen for when it is activated.
- The best way to prevent the opponent from using armor is to splat the opponent with the H-3 Nozzlenose D (or any other Ink Armor-equipped weapon). A charger user can prioritize said opponent when sniping, or a slayer can attempt to pick off an unwary H-3 Nozzlenose D.
- Focus fire on armored opponents for longer than usual - preferably with everyone ganging up on one opponent at a time - to compensate for their armor.
- Object Shredder allows a player to inflict three times damage onto armored opponents, as long as the armor is active. Combining this with Ink Storm can nearly neutralize armored pushes by the opponent.
Data
Version history
Version | Adjustments |
---|---|
Base game |
|
3.2.0 |
|
4.2.0 |
|
4.4.0 |
|
4.5.0 |
|
Quotes
Sheldon's Introduction
The H-3 Nozzlenose D is an H-3 Nozzlenose decorated with added flair from the manufacturer.
The flair doesn't make it stronger or anything, but it does come with Suction Bombs, which are great for pinning down your foes!
Add Ink Armor to the mix, and this baby here is perfect for those who want the ability to turn the tide of battle. |
“ | Our research appears to be on the nose this time: the H-3 Nozzlenose D to be precise – available tonight! This version of the H-3 Nozzlenose has the same stats, but new flair. This is very handy when showing it off to your friends…not that scientists such as myself value such things…harrumph. Rounding out the kit are Suction Bombs (which we hear really “suck” for your opponent) and Ink Armor to help the fortitude of your fellow squid-mates. | ” |
Gallery
-
Promo image
-
-
-
The results screen shows a player using the H-3 Nozzlenose D on the fifth line. This shows that the Special for this set is Ink Armor
-
A player (right) using the H-3 Nozzlenose D, clearly showing the longer snout and Dolphin Sticker
Demonstration
Trivia
- The Nozzlenose family of weapons are visually designed after garden hose reels. This is also reflected in their names in some other languages.
- The D in the name likely represents the Dolphin on the side.
- The dolphin may be a reference to the codename for the Nintendo GameCube: "Dolphin."
- The H in the name means "Heavy", referring that this weapon is the heavier version of the Nozzlenose weapons.
- This is supported by the French, Russian, and both Spanish translations of the weapon.
Names in other languages
Translation notes
References
- ↑ Live from Squid Research Lab: Love your H-3 Nozzlenose but wish that it had a...
- ↑ SplatoonJP Twitter
- ↑ Nintendo Direct 3.8.2018
- ↑ "Splatoon 2 - Quick Tip Analysis: 'H-3 Nozzlenose'" by ThatSrb2DUDE of Team Olive
- ↑ Sendou.ink Weapon Builds
- ↑ "Splatoon 2 - Weapon Roles and Playstyles (Classifying every Weapon)" by Wadsm
- ↑ Data parameters for Shooters