Splatana Stamper Nouveau

From Inkipedia, the Splatoon wiki

The Splatana Stamper Nouveau, formerly known as the Neo Splatana Stamper,[note 1] is a main weapon in Splatoon 3. It is the Nouveau-branded version of the Splatana Stamper, with identical stats.

Appearance

The Splatana Stamper Nouveau is similar to the appearance of the Splatana Stamper, except the base, which is white with a green strip along the handle. The date-wheel is also green, and the metal chassis has a sticker bearing the Nouveau logo.

Splatoon 3

Splatana Stamper Nouveau

Splatana Stamper Nouveau

Basic information
Category Main
Class Splatana
Sub Toxic Mist
Special Crab Tank
Special points 210p
Special depletion
Range
75 / 100
Damage
43 / 100
Impact
Fire rate
Charge speed
Ink speed
Mobility
Durability
Handling
60 / 100
Obtainable at
Level 20
Cost
Requirement
Added in Chill Season 2023 (6.0.0)
Specifications
Weight
Base damage 35 (Projectile-tap)
20 (Direct-tap)
70 (Projectile-charge)
140 (Direct-charge)
100 ( SRNW Projectile-tap)
45 ( SRNW Direct-tap)
180 ( SRNW Projectile-charge)
220 ( SRNW Direct-charge)
Base duration
Ink consumption 5.2% (tap)
11.7% (hold)
Base range
Rate of fire
Muzzle velocity
Base accuracy

MPU effect
SPU effect
SPU effect
Other variants Splatana Stamper Splatana Stamper
Order Splatana Replica Order Splatana Replica

The Splatana Stamper Nouveau was first revealed in the Chill Season 2023 announcement trailer on 15 November 2023, and was released on 1 December 2023 as part of the new season's content. Its kit consists of Toxic Mist and Crab Tank.

Data

  • The Splatana Stamper Nouveau is a middleweight weapon.
  • The matchmaking range is 16.5. The game's matchmaking system looks at a team's average matchmaking range value, and matches them against a team with a similar average.
  • The Splatana Stamper Nouveau fires projectiles as it swings.
  • The Splatana Stamper Nouveau can lunge forward if the user performs a charge slash while moving forward on the ground.
  • The Splatana Stamper Nouveau cannot store its charge.

Horizontal slash (pressing ZR)

  • The ink consumption of 5.2% per slash allows the user to slash 19 times per ink tank.
  • After slashing, there is a 40 frame cooldown before the ink tank starts refilling.
  • While slashing, the user's speed is set to 0.06 units per frame.
  • The projectile of the slash deals 35 damage, and the blade itself deals 20 damage, for a combined total of 55 damage.
  • The projectile hitbox consists of multiple smaller hitboxes that become larger the closer they are to the center of the projectile. The center hitbox has a radius of 0.3 units, and the edge hitboxes have a radius of 0.25 units. The hitboxes cover a total width of 2.5 units.
  • The projectile travels at 2.82 units per frame for 6 frames, when combined with its spawn position, it travels a total distance of 18.32 units.
  • The blade hitbox extends about 3.5 units in front of the user, and about 1.6 units to either side of the user.
  • The time between continuous slashes is 26 frames.
  • The user can submerge in ink 22 frames after the slash starts.
  • The blade hitbox appears 6 frames after the slash starts, and the projectile appears 9 frames after the slash starts.

Vertical slash (Holding ZR)

  • The ink consumption of 11.7% per slash allows the user to slash 8 times per ink tank.
  • After slashing, there is a 40 frame cooldown before the ink tank starts refilling.
  • While charging or slashing, the user's speed is set to 0.06 units per frame.
  • The projectile of the slash deals 70 damage, and the blade itself deals 140 damage, for a combined total of 210 damage.
  • The projectile hitbox consists of multiple smaller hitboxes that become larger the closer they are to the center of the projectile. The center hitbox has a radius of 0.5 units, and the edge hitboxes have a radius of 0.3 units. The hitboxes cover a total height of 3.8 units.
  • The projectile travels at 0.8 units per frame for 26 frames, when combined with its spawn position, it travels a total distance of 21.6 units.
  • The blade hitbox extends about 4 units in front of the user, and about 0.5 units to either side of the user.
  • It takes 20 frames to fully charge the weapon.
    • If the user is out of ink, then it takes 60 frames to fully charge the weapon.
  • The swing animation lasts for 22 frames.
  • The user can submerge in ink 14 frames after the slash starts.
  • The blade hitbox appears 3 frames after the slash starts, and the projectile appears 6 frames after the slash starts.
  • Lunges cover a distance of 3.0 units.
  • After 3 frames of startup, the lunge lasts for 8 frames. The blade hitbox appears after 15 frames, and the projectile appears after 18 frames.
    • The total animation lasts for 30 frames, after which the weapon can be used again.
    • The user can submerge in ink 25 frames after the animation starts.

[1][2]

Version history

Version Adjustments
6.1.0
  • Reduced the width of spray droplets created by charged slashes by approximately 10%: 2 units → 1.8 units.
7.0.0
  • Renamed from "Neo Splatana Stamper" to "Splatana Stamper Nouveau".

Quotes

Sheldon's Introduction

The Splatana Stamper Nouveau offers the same performance as the Splatana Stamper but with a new look and a whole new play style! Don't believe me? Imagine you're caught in some Toxic Mist, and the other team comes in and splats you instantly with a charged slash. Only that's what YOU can do to THEM! Not to mention the Crab Tank special, which is a total game changer. Now you've got the splatana for up-close-and-personal fighting and the Crab Tank to strike from afar. Formidable! If you like splatanas but wish you had a longer range, give this set a try! Once you master the sub and special, this set can be really... special. It's so nice I said it twice!

Badges

Main article: Badge#Weapon freshness

Reaching certain Freshness levels with the Splatana Stamper Nouveau will reward the player with special badges that they can use on their Splashtag.

Badges
4★ Splatana Stamper Nouveau User
5★ Splatana Stamper Nouveau User

Gallery

Trivia

  • The Splatana Stamper Nouveau is the first new weapon with Crab Tank to be added since the launch of Splatoon 3.
  • The Splatana Stamper Nouveau is the only weapon to have its name changed significantly (unlike the Octo Shot which only had a space added to it), and the first weapon to have its name changed between versions of the same game (unlike the Octo Shot which was changed between Splatoon and Splatoon 2), due to the previous name erroneously referencing the wrong brand.

Names in other languages

Language Name Meaning
Japan Japanese ジムワイパー・ヒュー
Jimu Waipā Hyū
Office Wiper[a]
Netherlands Dutch Stempelzwieper Neo (Pre-7.0.0) Stamp Splatana Neo
Stempelzwieper Nouveau Stamp Splatana Nouveau
Canada French (NOA) Éclatana d'estampe néo (Pre-7.0.0) Neo print splatana
Éclatana d'estampe nuancé Print splatana Nouveau
France French (NOE) Éclatana d'estampe Néo (Pre-7.0.0) Neo print splatana
Éclatana d'estampe nuancé Print splatana Nouveau
Germany German Stempel-Splatana Neo (Pre-7.0.0) Stamp Splatana Neo
Stempel-Splatana Fresco Fresh Stamp Splatana[b]
Italy Italian Splattalama Neo (Pre-7.0.0)
Splattalama master
Russia Russian Сплат-печатель «Нео» (Pre-7.0.0)
Splat-pechatel' «Neo»
Splat-seal «Neo»
Сплат-печатель «НуВо»
Splat-pechatel' «NuVo»
Splat-seal «Nouveau»
Mexico Spanish (NOA) Azotintador Pro neo (Pre-7.0.0)
Azotintador Pro maestro From azote ("whip") + entintador ("inker") + pro + maestro ("master" / Nouveau)
Spain Spanish (NOE) Azotintador pro maestro From azote ("whip") + entintador ("inker") + pro + maestro ("master" / Nouveau)
China Chinese (Simplified) 工作刮水刀·新艺术
gōngzuò guāshuǐdāo xīn yìshù
Working Wiper Nouveau
Hong Kong Chinese (Traditional) 工作刮水刀‧新藝術
gōngzuò guāshuǐdāo xīn yìshù (Mandarin)
gung1 zok3 gwaat3 seoi2 dou1 san1 ngai6 seot6 (Cantonese)
Working Wiper Nouveau
South Korea Korean 사무 와이퍼 휴
samu waipeo hyu
Office wiper Nouveau

Translation notes

  1. From 事務所 jimusho ("office") + hue ("Nouveau").
  2. Fresco is "fresh" in Spanish

Notes

  1. The Splatana Stamper Nouveau was previously named Neo Splatana Stamper when released with the 6.0.0 update. Its name was changed to the current name in the 7.0.0 update.

References