Template:Shooter data S2
From Inkipedia, the Splatoon wiki
This template takes shooter weapon parameters as input and generates a list of facts about the weapon.
Notes
Blasters have a duplicate parameter, PostDelayFrm_Main. The value in the first group seems to be unused.
Parameters
This is a complete list of shooter parameters from Splatoon 2.
| Name | Description |
|---|---|
| AutoShot | Automatic firing (not used if triple shot is greater than 0) |
| BurstAimMoveFrm | Shift frame |
| ColRadius | Field collision radius |
| CoopDamageMax | Maximum damage (Salmon Run) |
| CoopDamageMin | Minimum damage (Salmon Run) |
| CoopInkConsume | Ink consumption (Salmon Run) |
| CreateSplashLength | Splash movement distance |
| CreateSplashNum | Number of splash occurrences |
| DamageMax | Maximum damage |
| DamageMin | Minimum damage |
| DamageRate_MWPUG_High | |
| DamageRate_MWPUG_Mid | |
| DamageReduceEndFrame | Frame after shooting with minimum damage amount |
| DamageReduceStartFrame | Frame after launch (-1 is the same as guide cursor) |
| Damage_MWPUG_Max | |
| DegBias | Maximum bias |
| DegBiasDecrease | Bias reduction amount (every frame after exceeding the fire frame / not used for Splatlings) |
| DegBiasKf | Bias transition (not used for Splatlings) |
| DegBiasMin | Minimum bias (not used for Splatlings) |
| DegBias_MWPUG_High | |
| DegBias_MWPUG_Mid | |
| DegJumpBias | Maximum Bias (Jumping) |
| DegJumpBiasFrame | Bias end frame (Jumping) |
| DegJumpBiasInterpolateRate_MWPUG_High | |
| DegJumpBiasInterpolateRate_MWPUG_Mid | |
| DegJumpBiasStartFrame | Bias reduction starting frame (Jumping) |
| DegJumpBias_MWPUG_High | |
| DegJumpBias_MWPUG_Mid | |
| DegJumpRandom | Degree of randomness for jumping |
| DegJumpRandom_MWPUG_High | |
| DegJumpRandom_MWPUG_Mid | |
| DegRandom | Default degree of randomness |
| DegRandom_MWPUG_High | |
| DegRandom_MWPUG_Mid | |
| DrawRadius | Drawing size |
| ForceDropNearestSplashAddNum | Forces a splash even if you already shot the number of bullets needed. (0 for Off) |
| GuideCheckCollisionFrame | Guide collision check frame (Guide cursor display frame when not hit) |
| InitVel | Initial Velocity Z (Unused for Splatlings) |
| InitVelRate_MWPUG_High | |
| InitVelRate_MWPUG_Mid | |
| InkConsume | Ink consumption (maximum charge for splatlings) |
| InkMagazineRatio | |
| InkRecoverStop | Ink recovery restart frame |
| KnockBack | Knockback |
| MoveSpeed | Movement speed while charging |
| NearestSplahSplitLength | Width of occurrence of droplets falling in the nearest place (same width as other droplets when 0) |
| NearestSplashMaxScaleClamp | Closest splash occurance |
| NearestSplashPaintRadiusTimes | Spray radius multiplicator occurring at the nearest place |
| PaintFarDistance | Distance painted distance |
| PaintFarRadius | Distance painted radius |
| PaintMaxScaleClampA | |
| PaintMaxScaleClampB | |
| PaintMiddleDistance | |
| PaintMiddleRadius | |
| PaintMinScaleClampA | |
| PaintMinScaleClampB | |
| PaintNearDistance | Front paint distance |
| PaintNearRadius | Previous filling radius |
| PaintScaleOriginal | |
| PlayerColRadius | Player collision radius (same as field collision radius when negative) |
| PostDelayFrm_Main | 攻撃後：硬直Ｆ |
| RepeatFrame | Synchronize frames (see "Charging" at Splatling page) |
| SplashColRadius | Splash collision radius |
| SplashDrawRadius | Splash drawing size |
| SplashMaxScaleClamp | Other Splashes |
| SplashMaxScaleHighest | Use maximum stretch scale if the height to landing is less than this value |
| SplashMinScaleClamp | Minimum Stretch Scale |
| SplashMinScaleHighest | Use the minimum extension scale if the height to landing is over this value |
| SplashPaintRadius | Splash filling radius |
| SplashPaintRadius_MWPUG_High | |
| SplashPaintRadius_MWPUG_Mid | |
| SplashSplitNum | Number of droplet splits (Z) |
| SquidShootAnimationTimes | |
| SquidShootShorteningFrame | |
| StraightFrame | Number of rectilinear frames of a bullet |
| StraightStateEndSpeed | Forced speed at end of straightforward frame (does no change when initial speed is smaller than this value) |
| TripleShotSpan | Triple shot interval in frames (0 for normal shot, unused for Spatlings) |
| VariableShotFrame | Frame until shift type to continuous fire (0 for no shift) |
Blasters have additional parameters.
| Name | Description |
|---|---|
| BurstFrame | 爆発フレーム(0で強制オフ) |
| CollisionRadiusFar | 小ダメージ半径 |
| CollisionRadiusMiddle | 中ダメージ半径 |
| CollisionRadiusNear | 大ダメージ半径 |
| CoopDamageFar | 小ダメージ量 |
| CoopDamageMiddle | 中ダメージ量 |
| CoopDamageNear | 大ダメージ量 |
| DamageFar | [#]小ダメージ量 |
| DamageMiddle | [#]中ダメージ量 |
| DamageNear | [#]大ダメージ量 |
| HitWallSplashDistanceRate | ヒットXZ位置までの距離の何倍飛ばすか(0なら壁塗りしません) |
| HitWallSplashLength | ヒット位置からの長さ |
| HitWallSplashMinusYRate | 発生角度のメインの弾の角度と下方向の比率 |
| HitWallSplashPaintFallRadius | 壁垂れ塗り半径 |
| HitWallSplashPaintShockRadius | 壁衝撃塗り半径 |
| KnockBackRadius | ノックバック半径(床壁プレイヤーヒット時は「床壁プレイヤーヒット時」の半径率が掛けられます) |
| MoveLength | 飛行距離 |
| PostDelayFrm_Main | 攻撃後：硬直Ｆ |
| PreDelayFrm_HumanMain | 攻撃前：遅延追加Ｆ(ヒト中) |
| PreDelayFrm_SquidMain | 攻撃前：遅延追加Ｆ(イカ中) |
| ShotCollisionHitDamageRate | 空中爆発時からのダメージ率 |
| ShotCollisionHitRadiusRate | 空中爆発時からの半径率 |
| SphereSplashDropCollisionRadius | コリジョン半径 |
| SphereSplashDropDrawRadius | 描画半径 |
| SphereSplashDropInitSpeed | 初速 |
| SphereSplashDropOn | 放出(On時は周囲拡散の[ローカルX軸回転-90度 ワールドY軸回転0度]は発生しません) |
| SphereSplashDropPaintRadius | 塗り半径(空中爆発時) |
| SphereSplashDropPaintShotCollisionHitRadius | 塗り半径(床壁プレイヤーヒット時) |
| SphereSplashNoOccurRoundYOverRoundXMinus | Y軸回転が90度を超えていてX軸回転が0を下回っているとき |
| SphereSplashNoOccurRoundYOverRoundXPlus | Y軸回転が90度を超えていてX軸回転が0を超えているとき |
| SphereSplashPaintRadius | 空中爆発時 |
| SphereSplashPaintShotCollisionHitRadius | 床壁プレイヤーヒット時 |
| SphereSplashRoundAxisX | 角度1 |
| SphereSplashRoundAxisX | 角度2 |
| SphereSplashRoundAxisX | 角度3 |
| SphereSplashRoundAxisY | 角度1 |
| SphereSplashRoundAxisY | 角度2 |
| SphereSplashRoundAxisY | 角度3 |
| SphereSplashRoundAxisY | 角度4 |
| WallDropPaintFallRadius | 壁垂れ塗り半径 |
| WallDropPaintGroundRadius | 床塗り半径 |
| WallDropPaintShockRadius | 壁衝撃塗り半径 |
| WallDropPaintTargetAlpha | 初期目標アルファ |
| WallDropPaintTargetFrameMax | 初期目標速度到達フレーム最大 |
| WallDropPaintTargetFrameMin | 初期目標速度到達フレーム最小 |
| WallDropPaintTargetSpeed | 初期目標速度 |
| WallDropPaintTargetAlpha | 中間期目標終了アルファ |
| WallDropPaintTargetFrame | 中間期目標速度到達フレーム |
| WallDropPaintTargetSpeed | 中間期目標速度 |
| WallDropPaintTargetAlphaEnd | 最終期速度0移行値終了アルファ |
| WallDropPaintTargetAlphaMid | 最終期速度0移行値中間アルファ |
| WallDropPaintTargetAlphaRate | 最終期速度0移行値中間フレーム率 |
| WallDropPaintTargetFrameMax | 最終期速度0到達フレーム最大 |
| WallDropPaintTargetFrameMin | 最終期速度0到達フレーム最小 |
| WallHitPaintRadius | 塗り半径 |
