Unused content in Splatoon: Difference between revisions

From Inkipedia, the Splatoon wiki
mNo edit summary
Line 8: Line 8:


* [[Signal]]s were different. In the prerelease version, there was one signal with the text "Signal" rather than two signals.
* [[Signal]]s were different. In the prerelease version, there was one signal with the text "Signal" rather than two signals.
* An unused color, known in the database as "Moth Green", was to be used in [[Octo Valley]] and presumably multiplayer. It was shown in several trailers and images as dull green. It is also seen on the back cover of the ''Splatoon'' disc case.
* An unused color, known in the database as "Moth Green", was to be used in [[Octo Valley (mode)|Octo Valley]] and presumably multiplayer. It was shown in several trailers and images as dull green. It is also seen on the back cover of the ''Splatoon'' disc case.


===Weapons===
===Weapons===
Line 171: Line 171:
[[File:Captain Cuttlefish original spot.png|right|thumbnail|[[Cap'n Cuttlefish]]'s original location.]]
[[File:Captain Cuttlefish original spot.png|right|thumbnail|[[Cap'n Cuttlefish]]'s original location.]]


The entrance to [[Octo Valley]] is [[Cap'n Cuttlefish]]'s manhole. However, back then, the location of the manhole was slightly different. It was still in a corner, but there were no trash cans or a vending machine nearby. This might have been a different location, or perhaps the trash cans and vending machine were added later on.
The entrance to [[Octo Valley (location)|Octo Valley]] is [[Cap'n Cuttlefish]]'s manhole. However, back then, the location of the manhole was slightly different. It was still in a corner, but there were no trash cans or a vending machine nearby. This might have been a different location, or perhaps the trash cans and vending machine were added later on.


Before the game's release, it showed a white wall behind Cap'n Cuttlehish's manhole, which mean it could have been near [[Shrimp Kicks]] or probably somewhere close to [[Booyah Base]]. But this could also mean that Cap'n Cuttlefish was actually at the location where Spyke is in the final game. Another difference is that the lid of his manhole is not a grate, like in the final game, but a flat, solid, surface.
Before the game's release, it showed a white wall behind Cap'n Cuttlehish's manhole, which means it could have been near [[Shrimp Kicks]] or probably somewhere close to [[Booyah Base]]. But this could also mean that Cap'n Cuttlefish was actually at the location where Spyke is in the final game. Another difference is that the lid of his manhole is not a grate, like in the final game, but a flat, solid, surface.


===Health meter and Sunken Scrolls===
===Health meter and Sunken Scrolls===
Line 187: Line 187:
{{clr}}
{{clr}}


==[[Inkopolis Plaza]]==
==Inkopolis Plaza==
Shown in some screenshots, Inkopolis Plaza had a slight redesign before the game was released. All of the changes were aesthetic and did not affect the Plaza.
As shown in some screenshots, [[Inkopolis Plaza]] had a slight redesign before the game was released. All of the changes were aesthetic and did not affect the Plaza.


*The alley where [[Spyke]] resides in the final game was originally where the porthole to [[Octo Valley]] was. In the final game, the porthole was moved to the right side of the Inkopolis Tower near the vending machines.
*The alley where [[Spyke]] resides in the final game was originally where the porthole to [[Octo Valley (location)|Octo Valley]] was. In the final game, the porthole was moved to the right side of the Inkopolis Tower near the vending machines.
*The [[Squid Sisters]]' studio did not have a background and had the sisters stand near the television instead of sitting on the two seats in the final game.
*The [[Squid Sisters]]' studio did not have a background and had the sisters stand near the television instead of sitting on the two seats in the final game.
*There was originally a tree next to [[Cooler Heads]] that was removed in the final game.
*There was originally a tree next to [[Cooler Heads]] that was removed in the final game.

Revision as of 13:34, 23 August 2022

This page documents content included in pre-release versions of Splatoon that was not included in the released game and content that was found in the game's files that was not made available.

Multiplayer

Betainkmeter.gif

Various changes in the multiplayer modes can be seen, including map differences and minor cosmetic differences.

  • Signals were different. In the prerelease version, there was one signal with the text "Signal" rather than two signals.
  • An unused color, known in the database as "Moth Green", was to be used in Octo Valley and presumably multiplayer. It was shown in several trailers and images as dull green. It is also seen on the back cover of the Splatoon disc case.

Weapons

Early weapon icons found in Super Mario Maker's internal data indicate several differences from the final game:[1]

  • Footage showing the Dynamo Roller in the Octo Valley trailer showed that its roller head, and presumably all other rollers' heads, did not fold to the side while standing still or running in humanoid form.
  • The Classic Squiffer initially had Burst Bombs as its sub weapon, according to the Octo Valley trailer.
  • Early concept art and the Octo Valley trailer showed the Rapid Blaster had the bottom part of the Rapid Blaster Pro attached to it.
  • Disruptors initially lacked handles and were simple black balls.
  • Sprinklers' metallic portions were originally much thinner.
  • Squid Beakons had the shape of a flag and lacked any satellite-like elements.
  • Suction Bombs were originally small balls.
  • Splash Walls originally were white contraptions that stood on a long stand, indicating the ink from the Splash Wall was originally shot upwards.
  • Burst Bombs initially had more of an oval shape, and the lines stretching around it were less straight.
  • The Inkstrike strongly resembled a rocket and was colored grey initially.
  • The early Bubbler icon was more transparent and lacked the silhouette of an Inkling.
  • A recolored Inkzooka named "BigLaser" is in the files. Presumably, this was a placeholder for the Killer Wail, as its Japanese name translates to "Megaphone Laser".
  • A pre-release image for Splatoon shows an Inkling using what is either an unused scoped charger or a Splatterscope with an unused skin. This is presumably the E-liter 3K Scope.

Early weapon designs

Stages

File:BetaMapsE3.jpeg
Comparisons between the appearance of Saltspray Rig and Urchin Underpass at E3 2014 and in the final game.
  • An early version of Arowana Mall was slightly thinner, had overhanging roofs and pillars along the side, and featured a thin gate towards what appears to be the center of the stage.
  • Blackbelly Skatepark originally featured stairs near the ends of the stage and at the entrance to the central area surrounding the tower.[2]
  • Saltspray Rig originally had small areas further to the left and right of the stage, and the bottom platform was split into two and could only be accessed from the sides.
  • The center of Urchin Underpass was originally larger and had two central entryways from each side instead of one.
  • Camp Triggerfish originally had fewer walls to defend players. The overall layout was much wider and open compared to when it was released.

Gear

Headgear

Clothing

  • An early version of the Varsity Jacket featured a grey and brown color scheme and a different logo. It was referred to as the Varsity Hoodie in Splatoon's files.
  • A shirt referred to as "Shirtstravaganza" has an unused icon in Splatoon's files. The Shirtstavaganza would have been light blue and featured navy and red markings across the entire shirt.
  • The Round-Collar Shirt was originally intended to be gray.
  • The Reel Sweat was originally supposed to be gray as well, and was even originally referred to as the Gray-Reel Sweat (Grey Reel Sweat in European versions).
  • The Purple Camo LS initially featured a lime green armband instead of the final's orange one.
  • A T-shirt called the White Puffer Tee was cut from the game. It prominently featured a modified version of Firefin's logo.
  • The Layered Anchor LS was originally supposed to be dark grey.
  • The White Layered LS was originally supposed to have no long-sleeved underlayer.

Shoes

Octo Valley

The 5 November 2014 Nintendo Direct showed off what would later be known as Octo Valley for the first time. However, there were many differences compared to the mode in the final release.

Entrance

In the prerelease version of Splatoon, there were garbage bins near Inkopolis Tower. In the final game, it was replaced with Cap'n Cuttlefish's manhole to the entrance to Octo Valley.
Cap'n Cuttlefish's original location.

The entrance to Octo Valley is Cap'n Cuttlefish's manhole. However, back then, the location of the manhole was slightly different. It was still in a corner, but there were no trash cans or a vending machine nearby. This might have been a different location, or perhaps the trash cans and vending machine were added later on.

Before the game's release, it showed a white wall behind Cap'n Cuttlehish's manhole, which means it could have been near Shrimp Kicks or probably somewhere close to Booyah Base. But this could also mean that Cap'n Cuttlefish was actually at the location where Spyke is in the final game. Another difference is that the lid of his manhole is not a grate, like in the final game, but a flat, solid, surface.

Health meter and Sunken Scrolls

In the prerelease version, the player had five lives; in the full game, this was reduced to three, presumably for a little more challenge. Also, the outline for the Sunken Scroll is different from the outline in the final version. Here, it looks more like an outline for two sheets of paper rather than a scroll itself.

Enemy differences and unused enemies

The unused Octarian variant.

In one part of the singleplayer trailer which appears to be in a level similar to the final game's Shifting Splatforms, a normal, standing Shielded Octotrooper can be seen firing ink rapidly. In the final game, this trait is only given to Twintacle Octotroopers, as normal Octotroopers only fire one blob of ink at a time.

An unused Octarian variant can also be seen in the video. It appeared to be a tall enemy, wearing what appears to be a cloak, and was supposed to appear in a pool of ink. It is unknown if this was an early Octosniper, or just a different cut enemy.

Inkopolis Plaza

As shown in some screenshots, Inkopolis Plaza had a slight redesign before the game was released. All of the changes were aesthetic and did not affect the Plaza.

  • The alley where Spyke resides in the final game was originally where the porthole to Octo Valley was. In the final game, the porthole was moved to the right side of the Inkopolis Tower near the vending machines.
  • The Squid Sisters' studio did not have a background and had the sisters stand near the television instead of sitting on the two seats in the final game.
  • There was originally a tree next to Cooler Heads that was removed in the final game.
  • A lamp pole near Spyke's alley was removed in the final game, as well.
  • The yellow concrete arrow near Inkopolis Tower originally pointed upwards and was shaped like a squid.

Other

File:Retro-Style Footage.jpg
Unknown retro-style footage
  • As with many games, the light engine was much darker in the prerelease version.
  • There is footage of some sort of 2D retro-style gameplay showing an Inkling shooting at an Octotrooper. Nothing like this appeared in the final game, but it may have been intended as part of the Arcade Machine.

See also

References