Grizzco Brella: Difference between revisions
(Added a gallery section for 3 and images for both) |
(Added data section for splatoon 3) |
||
Line 51: | Line 51: | ||
The Grizzco Brella returns in ''[[Splatoon 3]]'', unchanged from ''Splatoon 2''. It is once again exclusive to wildcard rotations in Salmon Run. It was first available on {{date|2022-11-19}} at {{time|2022-11-19 00:00 UTC}}. | The Grizzco Brella returns in ''[[Splatoon 3]]'', unchanged from ''Splatoon 2''. It is once again exclusive to wildcard rotations in Salmon Run. It was first available on {{date|2022-11-19}} at {{time|2022-11-19 00:00 UTC}}. | ||
===Data=== | |||
<section begin=data3 />{{Brella data S3 | |||
| CanopyGravity = 1.102 | |||
| CanopyInitSpeed = 7.92 | |||
| CanopySpeedAirAddScaleXZ = 0.72 | |||
| CanopySpeedGroundAddScale = 0.48 | |||
| FootSplashShapeCastOffset = 0.4 | |||
| DamageEffectiveTotalMax = 800 | |||
| 0_ValueMax = 150 | |||
| 0_ValueMin = 150 | |||
| 0_DrawRadius = 1.6 | |||
| 0_HorizontalDegree = 0.0 | |||
| 0_HorizontalOffset = 0.0 | |||
| 0_InitVelRandom = 0.0 | |||
| 0_GoStraightStateEndMaxSpeed = 2.0 | |||
| 0_GoStraightToBrakeStateFrame = 2 | |||
| 0_SpawnSpeed = 4.0 | |||
| 0_DistanceNear = 1.0 | |||
| 0_WidthHalfFar = 1.6 | |||
| 0_WidthHalfMiddle = 1.6 | |||
| 0_WidthHalfNear = 1.6 | |||
| 0_TotalNum = 1 | |||
| 0_VerticalDegree = 0.0 | |||
| 0_VerticalOffset = 0.0 | |||
| 1_EndRadiusForField = 0.2 | |||
| 1_EndRadiusForPlayer = 0.2 | |||
| 1_InitRadiusForField = 0.2 | |||
| 1_InitRadiusForPlayer = 0.2 | |||
| 1_ValueMax = 150 | |||
| 1_ValueMin = 150 | |||
| 1_DrawRadius = 1.6 | |||
| 1_HorizontalDegree = 5.0 | |||
| 1_HorizontalOffset = 0.05 | |||
| 1_InitVelRandom = 1.2 | |||
| 1_GoStraightStateEndMaxSpeed = 2.0 | |||
| 1_GoStraightToBrakeStateFrame = 2 | |||
| 1_SpawnSpeed = 4.0 | |||
| 1_WidthHalfFar = 1.5 | |||
| 1_WidthHalfMiddle = 1.5 | |||
| 1_WidthHalfNear = 1.5 | |||
| 1_TotalNum = 3 | |||
| 1_VerticalDegree = 5.0 | |||
| 1_VerticalOffset = 0.05 | |||
| 2_EndRadiusForField = 0.2 | |||
| 2_EndRadiusForPlayer = 0.2 | |||
| 2_InitRadiusForField = 0.2 | |||
| 2_InitRadiusForPlayer = 0.2 | |||
| 2_ValueMax = 150 | |||
| 2_ValueMin = 150 | |||
| 2_DrawRadius = 1.6 | |||
| 2_HorizontalDegree = 11.0 | |||
| 2_HorizontalOffset = 0.1 | |||
| 2_InitVelRandom = 1.2 | |||
| 2_GoStraightStateEndMaxSpeed = 2.0 | |||
| 2_GoStraightToBrakeStateFrame = 2 | |||
| 2_SpawnSpeed = 4.0 | |||
| 2_WidthHalfFar = 1.5 | |||
| 2_WidthHalfMiddle = 1.5 | |||
| 2_WidthHalfNear = 1.5 | |||
| 2_TotalNum = 6 | |||
| 2_VerticalDegree = 10.0 | |||
| 2_VerticalOffset = 0.1 | |||
| ShotgunPaintRadiusShock = 1.65 | |||
| ShotgunFallPeriodFirstFrameMax = 40 | |||
| ShotgunFallPeriodFirstFrameMin = 20 | |||
| ShotgunFallPeriodFirstTargetSpeed = 0.06 | |||
| ShotgunFallPeriodLastFrameMax = 35 | |||
| ShotgunFallPeriodLastFrameMin = 15 | |||
| CreateSplashLength = 4.5 | |||
| CreateSplashNum = 3 | |||
| SplashPaintDepthScaleFullActive = 2.31 | |||
| SplashPaintDepthScaleOneActive = 6.0 | |||
| SplashPaintWidthFullActive = 1.5 | |||
| SplashPaintWidthOneActive = 0.7 | |||
| SplashPaintRadiusFall = 0.65 | |||
| SplashPaintRadiusGround = 0.6 | |||
| SplashPaintRadiusShock = 1.65 | |||
| SplashFallPeriodFirstFrameMax = 15 | |||
| SplashFallPeriodFirstTargetSpeed = 0.03 | |||
| SplashFallPeriodLastFrameMax = 25 | |||
| SplashFallPeriodLastFrameMin = 10 | |||
| SplashFallPeriodSecondFrame = 5 | |||
| SplashFallPeriodSecondTargetSpeed = 0.08 | |||
| ZRate = 2.0 | |||
| CanopyOpenEndOffset = 0.0 | |||
| CanopyOpenStartOffset = -0.6 | |||
| InkConsumeUmbrella = 0.3 | |||
| IsAlwaysNaked = True | |||
| InkConsume = 0.02 | |||
| InkRecoverStop = 20 | |||
| InkRecoverStopCharge = 20 | |||
| JumpGndCharge = 0.1 | |||
| MoveSpeed = 0.096 | |||
| MoveSpeedCharge = 0.096 | |||
| RepeatFrame = 12 | |||
}}<ref>[https://leanny.github.io/splat3/parameters.html ''Splatoon 3'' - Parameter Database]</ref><section end=data3 /> | |||
===Availability=== | ===Availability=== |
Revision as of 16:53, 28 July 2023
The Grizzco Brella is a Salmon Run and Salmon Run Next Wave rare weapon in Splatoon 2 and Splatoon 3. It appears to be an illegally modified Splat Brella.
The weapon is a rapid firing brella weapon. Unlike other brellas, this weapon has no canopy. Instead, holding down the button fires continuously, similar to a Shooter or the Undercover Brella. The weapon has an unusually high firing rate for a brella weapon, having over double the firing rate of both the Splat Brella and Undercover Brella.
It could be that the mechanism has been focused on firing ink rather than having a shield open which would give the Grizzco Brella a higher rate of fire that outclasses even the Undercover Brella.
Appearance
The Grizzco Brella is somewhat similar in appearance to the Splat Brella. The shield has been removed, revealing the metal poles usually covered by it. A small green and white lifesaver is strapped around the muzzle. Three yellow pill bottles with white caps and unknown contents (if any) are sticking out of the center pole.
Splatoon 2
Basic information | |
---|---|
Category | Main |
Class | Brella |
Specifications | |
Base damage | 60 |
Ink consumption | 2% |
The Grizzco Brella is a rare weapon only available during Salmon Run wildcard rotations. It was first available on 15 October 2017 at 00:00 UTC.
Data
- The Grizzco Brella has the same firing rate as the .96 Gal, shooting once every 1/5th of a second.
- This is over 2x faster than the Splat Brella and Undercover Brella, and over 4x faster than the Tenta Brella.
Availability
The Grizzco Brella was available during the following wildcard rotations:
Gallery
-
Early model of the Brella
-
A player holding the weapon after losing a shift
Splatoon 3
![](http://cdn.wikimg.net/en/splatoonwiki/images/thumb/5/53/Eel_construction_worker.png/60px-Eel_construction_worker.png)
Can you help us get it done?
Basic information | |
---|---|
Category | Main |
Class | ![]() |
Specifications | |
Base damage | 60 |
Ink consumption | 2% |
The Grizzco Brella returns in Splatoon 3, unchanged from Splatoon 2. It is once again exclusive to wildcard rotations in Salmon Run. It was first available on 19 November 2022 at 00:00 UTC.
Data
- The Grizzco Brella has no canopy.
- Ink consumption is 2% per shot, allowing the user to fire 50 times with a full ink tank.
- After firing, there is a 20 frame (0.33 second) cooldown before the ink tank starts refilling.
- When firing from humanoid form, the first shot takes 8 frames to come out. When firing from swim form, the first shot takes 15 frames to come out.
- The time between consecutive shots is 12 frames.
- The time between firing the weapon and being able to use a sub or enter swim form is 20 frames.
- The movement speed while firing is 0.096 units per frame.
- The Grizzco Brella fires 10 pellets per shot.
- Pellets fly straight at 4.0 units per frame for 2 frames, covering a distance of 8 units.
- After that, the speed of the pellets is set to 2.0 units per frame if it is not already lower than the listed value, and they lose 36% of their speed every frame (including the first frame after they stop traveling straight). Once the velocity decreases below a certain threshold, they will begin to be slowed less and fall faster.
- Each pellet has a base damage of 15. After the pellet has been in the air for 8 frames, it begins to lose damage every frame until it reaches 15 damage at frame 24. The maximum damage that can be dealt to a single target per shot is 80.
- The effective range is about 11.31 units.
- This number may vary at different firing angles.
- The effective range is about 11.31 units.
Availability
The Grizzco Brella was available during the following wildcard rotations:
Template:Salmon Run: Next Wave/Wildcard rotations
Gallery
![](http://cdn.wikimg.net/en/splatoonwiki/images/thumb/f/f2/Template_image_More_images.png/50px-Template_image_More_images.png)
-
A player in the middle of firing the Grizzco Brella
Etymology
The weapon is a Splat Brella that was modified by Grizzco.
Names in other languages
Language | Name | Meaning |
---|---|---|
クマサン印のシェルター Kuma-san jirushi no sherutā |
Mr. Bear-branded Shelter | |
Beer & Co Plenzer (Splatoon 2) Beer & Co-plenzer (Splatoon 3) |
Grizzco Brella | |
Para-encre M. Ours Cie | - | |
Para-encre M. Ours SA | Mr. Bear Ltd. Splat Brella | |
Bär-Pluviator | Bear Pluviator | |
Sparasole Ursus | Grizzco Brella (Ursus = Mr. Grizz) | |
Зонтган «Потапыч Inc.» Zontgan «Potapych Inc.» |
Brellagun «Potapych Inc.» | |
Paratintas Don Oso | Grizzco Brella | |
熊先生印章防空伞 xióng xiānshēng yìnzhāng fángkōngsǎn (Mandarin) |
Mr. Bear Seal Anti-Air Umbrella | |
熊先生印章防空傘 xióng xiānshēng yìnzhāng fángkōngsǎn (Mandarin) |
Mr. Bear Seal Anti-Air Umbrella | |
Mr. 베어표 셸터 Mr. beeopyo syelteo |
Mr. Bear Shelter |
Nonstandard main weapons in Splatoon 2
|