Grizzco Slosher: Difference between revisions

From Inkipedia, the Splatoon wiki
VisualWikitext
(fixed plural link, should have previewed first)
(Rewrote initial section a small amount)
Line 2: Line 2:
The '''Grizzco Slosher''' is a [[Salmon Run]] and [[Salmon Run Next Wave]] [[rare weapon]] in ''[[Splatoon 2]]'' and ''[[Splatoon 3]]''. It appears to be an illegally modified [[Sloshing Machine]].
The '''Grizzco Slosher''' is a [[Salmon Run]] and [[Salmon Run Next Wave]] [[rare weapon]] in ''[[Splatoon 2]]'' and ''[[Splatoon 3]]''. It appears to be an illegally modified [[Sloshing Machine]].


The weapon is an extremely slow slosher type weapon, with a long wind-up time and very long range. More specifically, it is similar to the [[Dynamo Roller]] with respect to flick speed, range, and ink consumption. The projectiles from this weapon are very similar to those of the [[Sloshing Machine]], albeit much larger, with a significantly slower travel speed, and the projectile will not arc, instead traveling straight forward and falling at a 90° angle down at its max range. The ink trail left by the projectiles is dropped in chunks, rather than gradually. The defining factor that sets the Grizzco Slosher apart is its unique ability to pierce through anything, comparable to the [[Sting Ray]] and the [[Explosher]]. The Grizzco Slosher can hit targets directly and continue to travel through them. This piercing ability also allows the weapon to attack through [[Scrapper]]'s, [[Drizzler]]'s, [[Flipper-Flopper]]s', and [[Slammin' Lid]]'s armor, [[Steel Eel]]'s and [[Griller]]'s ink walls, as well as do direct damage to [[Flyfish]] and [[Steelhead]]s. The weapon has a very high ink consumption, only allowing for a maximum of 4 shots with a full tank. It does the most damage out of any main weapon.
The weapon is an extremely slow slosher type weapon, with a long wind-up time and very long range. More specifically, it is similar to the [[Dynamo Roller]] with respect to flick speed, range, and ink consumption. The projectiles from this weapon are very similar to those of the [[Sloshing Machine]], albeit much larger, with a significantly slower travel speed, and the projectile will not arc, instead traveling straight forward and falling at a 90° angle down at its max range. The ink trail left by the projectiles is dropped in chunks, rather than gradually. The defining factor that sets the Grizzco Slosher apart is its unique ability to pierce through anything, comparable to the [[Sting Ray]] and the [[Explosher]]. The Grizzco Slosher can hit targets directly and continue to travel through them. This piercing ability also allows the weapon to attack through [[Scrapper]]'s and [[Drizzler]]'s armor, [[Slammin' Lid|Slammin' Lids]] and their forcefields, and [[Steel Eel]]'s and [[Griller]]'s ink walls. It can also deal direct damage to [[Flyfish]] and [[Steelhead]]s, even if they are not in a vulnerable state. The weapon has a very high ink consumption, only allowing for a maximum of 4 shots with a full tank. It does the most damage out of any main weapon.


== Appearance ==
== Appearance ==

Revision as of 13:53, 24 December 2022

The Grizzco Slosher is a Salmon Run and Salmon Run Next Wave rare weapon in Splatoon 2 and Splatoon 3. It appears to be an illegally modified Sloshing Machine.

The weapon is an extremely slow slosher type weapon, with a long wind-up time and very long range. More specifically, it is similar to the Dynamo Roller with respect to flick speed, range, and ink consumption. The projectiles from this weapon are very similar to those of the Sloshing Machine, albeit much larger, with a significantly slower travel speed, and the projectile will not arc, instead traveling straight forward and falling at a 90° angle down at its max range. The ink trail left by the projectiles is dropped in chunks, rather than gradually. The defining factor that sets the Grizzco Slosher apart is its unique ability to pierce through anything, comparable to the Sting Ray and the Explosher. The Grizzco Slosher can hit targets directly and continue to travel through them. This piercing ability also allows the weapon to attack through Scrapper's and Drizzler's armor, Slammin' Lids and their forcefields, and Steel Eel's and Griller's ink walls. It can also deal direct damage to Flyfish and Steelheads, even if they are not in a vulnerable state. The weapon has a very high ink consumption, only allowing for a maximum of 4 shots with a full tank. It does the most damage out of any main weapon.

Appearance

The Grizzco Slosher is somewhat similar in appearance to the Sloshing Machine. However, the paint job on the Grizzco Slosher seems to have been removed, revealing the metal beneath. The Grizzco Slosher has four mismatched metal tubes sticking out from the sides, a white Grizzco logo on the side, and some extra tubes and wires in the back.

Splatoon 2

Grizzco Slosher

Grizzco Slosher

Basic information
Category Main
Class Slosher
Sub
Special
Special points
Special depletion
Range
Damage
Impact
Fire rate
Charge speed
Ink speed
Mobility
Durability
Handling
Level
Cost
Requirement
Added in
Specifications
Weight
Base damage 150 (Min. splash)
360 (Direct hit)
Base duration
Ink consumption 25%
Base range
Rate of fire
Muzzle velocity
Base accuracy
MPU effect
SPU effect
SPU effect
Other variant

The Grizzco Slosher is a rare weapon only available during Salmon Run Wildcard rotations. It was first available on 17 June 2018 at 00:00 UTC

Gallery

  • The promotional image for the Grizzco Slosher.

    The promotional image for the Grizzco Slosher.

Availability

The Grizzco Slosher was available during the following wildcard rotations:

Start time Stage Weapons Rare weapon
17 June 2018 at 00:00 UTC Marooner's Bay Random Random Random Random Grizzco Slosher
29 June 2018 at 18:00 UTC Salmonid Smokeyard Random Grizzco Slosher
14 July 2018 at 06:00 UTC Salmonid Smokeyard Random Rare Random Rare Random Rare Random Rare Any
28 July 2018 at 18:00 UTC Salmonid Smokeyard Random Grizzco Slosher
25 August 2018 at 00:00 UTC Salmonid Smokeyard Random Grizzco Slosher
5 October 2018 at 18:00 UTC Marooner's Bay Random Rare Random Rare Random Rare Random Rare Any
9 November 2018 at 06:00 UTC Ruins of Ark Polaris Random Random Random Random Grizzco Slosher
30 December 2018 at 00:00 UTC Spawning Grounds Random Rare Random Rare Random Rare Random Rare Any
22 February 2019 at 12:00 UTC Marooner's Bay Random Grizzco Slosher
19 April 2019 at 18:00 UTC Salmonid Smokeyard Random Random Random Random Grizzco Slosher
4 May 2019 at 06:00 UTC Lost Outpost Random Rare Random Rare Random Rare Random Rare Any
29 June 2019 at 12:00 UTC Ruins of Ark Polaris Random Grizzco Slosher
19 July 2019 at 12:00 UTC Ruins of Ark Polaris Random Rare Random Rare Random Rare Random Rare Any
17 August 2019 at 12:00 UTC Spawning Grounds Random Random Random Random Grizzco Slosher

Splatoon 3

This article or section is a stub.
You can help the wiki by adding to it.
Grizzco Slosher

Grizzco Slosher

Basic information
Category Main
Class Slosher
Sub
Special
Special points
Special depletion
Range
Damage
Impact
Fire rate
Charge speed
Ink speed
Mobility
Durability
Handling
Level
Cost
Requirement
Added in
Specifications
Weight
Base damage 150 (Min. splash)
360 (Direct hit)
Base duration
Ink consumption 25%
Base range
Rate of fire
Muzzle velocity
Base accuracy
MPU effect
SPU effect
SPU effect
Other variant

The Grizzco Slosher returns in Splatoon 3, and is once again only available during wildcard rotations in Salmon Run. It was first available on 23 December 2022 at 16:00 UTC

Availability

The Grizzco Blaster was available during the following wildcard rotations:

Template:Salmon Run: Next Wave/Wildcard rotations

Details

  • The initial swing of the weapon is significantly slower than subsequent swings.

Etymology

The weapon is a Slosher (namely, a Sloshing Machine) that was modified by Grizzco.

Names in other languages

Template:Foreignname

References


Nonstandard main weapons in Splatoon 2
Nonstandard main weapons in Splatoon 3
Retrieved from "https://splatoonwiki.org/w/index.php?title=Grizzco_Slosher&oldid=334277"