Slammin' Lid

From Inkipedia, the Splatoon wiki

Template:InfoboxCharacter Slammin' Lids are Boss Salmonids that appear in Salmon Run Next Wave in Splatoon 3.

Description

The Slammin' Lid is a flying saucer-shaped aircraft that floats through the air, piloted by a Salmonid in its top center. It creates a force field beneath it similar to the Big Bubbler that protect Salmonids. It also deploys Lesser Salmonids from its underside. It attacks by slamming into the ground when a player passes underneath it, but it takes a moment to fly back upwards after attacking, giving the player an opportunity to get on top of it and splat its pilot. If there is high ground available, the pilot can be attacked directly as well. The pilot is equipped with a soup ladle, which it uses to perform a 360-degree swipe to hit players off its saucer if they stand atop it for too long.

The Slammin' Lid is one of the few Salmonids that can splat other Salmonids, including most Boss Salmonids. When it slams onto a Salmonid, the player who triggered the slam gets the Power Eggs from the splats. This can be used to take down certain foes instantaneously, meaning that it is not always a good idea to neutralize the Slammin' Lid right away.

While deploying the lesser Salmonids, the Slammin' Lid has an animation of the perforated doors on the underside of the machine opening. This can be viewed in-game when looking at the bottom of the Boss Salmonid while it is dropping the lesser Salmonids.

The Slammin' Lid drivers also have a peculiar appearance. The dark red top is often labeled as a hatch, but this is in fact the hairstyle of the driver Salmonid. The real hatch is visible behind the driver when standing on the Slammin' Lid. This is probably the reason why the driver is still vulnerable despite seemingly having a headpiece that would be able to protect it.

The driver's side view showing the red hairstyle being part of the Salmonid.

Quotes

The following text is quoted from the Salmonid Field Guide.[1]

Basic Information

  • It's a pilot riding on a hovering, saucer-shaped craft.
  • These provide support for other Salmonids by creating a circular force field that ink cannot pass through.

Attack Behavior

  • Lesser Salmonids will be deployed from the hole on the bottom of the saucer.
  • It will try to squash targets who walk into the force field.

Elimination

  • There is a pilot stationed on top of the craft. Defeating the pilot will destroy the craft.
  • Walk into the barrier under the Slammin' Lid, then quickly dodge when the craft drops down to splat you. Once it's down, that's your chance to get on top and attack the pilot.

Supporting Information

  • The cutting-edge technology incorporated into the craft was obtained by trading with Octarians.
  • Because of the high cost to build these, only highly experienced veterans are allowed to pilot them.
  • To save on weight, the craft has no weapons. This is why it attacks by trying to smash enemies beneath it.

Tips

  • If Lesser Salmonids are not a threat to the team and the quota is completed, it is fine to leave Slammin' Lids alone as they cannot directly splat players unless they are under the barrier.
  • Slammin' Lids can splat almost any Salmonid, including Boss Salmonids.
    • Bringing down a Slammin' Lid on a Steelhead causes a large explosion, wiping out any Lesser Salmonids in the area.
    • If a Slammin' Lid is stationed above a chokepoint, such as the right side path on Sockeye Station, it may be wiser to keep it alive for its boss splatting capability. This is especially effective against Steelheads, Steel Eels, Scrappers, Goldies, and even Flyfish if they happen to be under it. This is less effective on high tide, as generally fewer chokepoints are present.
  • Players can walk and push against the pilot during its ladle swing attack to cancel most of the momentum from being hit and stay on the lid. The pilot repeatedly uses the ladle swing at set intervals until all players are knocked off or the Slammin' Lid is shot down.
  • A player can stay above the ground by jumping between two or more Slammin' Lids.
  • Getting on top of a Slammin' Lid can be useful for the increase in height. Instead of immediately splatting the boss, the extra range can allow the player to revive teammates more easily or splat certain bosses such as Flyfish or Fish Sticks. Note that the Slammin' Lid will knock the player off automatically after a few seconds.

Badges

Main article: Badge#Salmon Run

Splatting Slammin' Lids a specific number of times in Salmon Run: Next Wave will reward the player with special badges that they can use on their Splashtag.

Slammin' Lid Badges
S3 Badge Slammin' Lid 100.png Slammin' Lid Splats x 100
S3 Badge Slammin' Lid 1000.png Slammin' Lid Splats x 1,000
S3 Badge Slammin' Lid 10000.png Slammin' Lid Splats x 10,000
Sagakeen art girl.png
This article or section needs more images!
You can help the wiki by adding some to keep it looking fresh!

Gallery

Trivia

  • Prior to 2.0.0, if players managed to stay on the Slammin' Lid after the pilot tries to hit them off with the ladle, the second swing would go through the players as if it had no hurtbox. From then on, subsequent swings would alternate between hitting and not hitting the players.
  • The Slammin' Lid's crushing behavior is similar to that of the Octoseeker.
  • The Slammin' Lid is the only Salmonid that can deliberately damage other Salmonids.
    • The Steelhead's explosion does damage other Salmonids too but is a side effect of being defeated by a player.

Etymology

"Slammin' Lid" is a pun on the word "salmonid". Additionally, the saucer resembles a pot's lid, that slams down on players beneath it.

Names in other languages

Language Name Meaning
Japan Japanese ナベブタ
nabe-buta
From 鍋 nabe ("pot") and 蓋 futa ("lid")
Netherlands Dutch Dreksel From drek ("goo") and deksel ("lid")
CanadaFrance French Couverclard From Couvercle ("lid") and the suffix -ard implying a negative connotation
Germany German Deckler From Deckel ("lid")
Italy Italian Coperchiotto From coperchio ("lid")
Russia Russian Мокрышка
Mokryshka
From мокрый mokryy ("wet") and крышка kryshka ("lid")
SpainMexico Spanish Tapaollas From tapa ("lid") and ollas ("pots")
China Chinese (Simplified) 锅盖鱼
guō gài yú (Mandarin)
Pot Lid Fish
Hong Kong Chinese (Traditional) 鍋蓋魚
guō gài yú (Mandarin)
Pot Lid Fish
South Korea Korean 냄비 뚜껑
naembi ttukkeong
Pot Lid
Translate logo.svg Internal SakeSaucer [2]

References