Octo Shot Replica: Difference between revisions
GloverMist (talk | contribs) m (→Version history: Updated per Splattershot) |
DuckSaxDog1 (talk | contribs) (Alpha) Tags: mobile edit mobile web edit |
||
Line 181: | Line 181: | ||
** This also makes it possible to start playing online without ever using the Splattershot Jr. | ** This also makes it possible to start playing online without ever using the Splattershot Jr. | ||
* This weapon is tied with the [[Enperry Splat Dualies]], [[L-3 Nozzlenose D]], [[Ballpoint Splatling]], and [[Tentatek Splattershot]] for the most expensive [[Inkjet]] in the game (200 p). | * This weapon is tied with the [[Enperry Splat Dualies]], [[L-3 Nozzlenose D]], [[Ballpoint Splatling]], and [[Tentatek Splattershot]] for the most expensive [[Inkjet]] in the game (200 p). | ||
*in splatoon alphastar 716 got 999999 point of turf n this weapon. | |||
==Names in other languages== | ==Names in other languages== |
Revision as of 11:55, 26 August 2020
The Octo Shot Replica, known in Splatoon as the Octoshot Replica, is a main weapon in Splatoon and Splatoon 2.
Splatoon
Basic information | |
---|---|
Category | Main |
Class | Shooter |
Sub | Suction Bomb |
Special | Inkzooka |
Special depletion | 75% |
Range | |
Damage | |
Fire rate | |
Obtainable at | |
Level | 40 |
Specifications | |
Base damage | 35 |
Ink consumption | 0.9% |
Other variants | Splattershot Tentatek Splattershot Wasabi Splattershot Hero Shot Replica |
The Octoshot Replica was released on 5 August 2015. The Octoshot Replica is based on the Octoshots used by Octolings, looking like a sleeker, more metallic version of the Splattershot.
It cannot be purchased and only obtained as an award from Judd for reaching Level 40. The Octoshot Replica's stats, sub weapon, and special weapon are identical to those of the Tentatek Splattershot. It generally has middling stats with no particular strengths or weaknesses. It comes with Suction Bombs and the Inkzooka. It was introduced in Version 2.0.0 with the addition of Judd's rewards.
Data
- The Octo Shot Replica is a middleweight weapon.
- Each shot consumes 0.9% of the ink tank capacity.
- This allows players to fire 111 shots before needing to refill the ink supply.
- This stat can be changed with Ink Saver (Main).
- When firing continuously, it shoots a bullet every 6 frames (10 shots per second).
- When firing while moving, the player's movement speed is set to 0.72 units per frame.
- After firing, there is a 20 frame cooldown before the ink tank starts refilling.
- Each shot has a base damage of 35.
- Shots travel straight for 4 frames. After that, they may lose damage. A shot will lose damage until it reaches 17.5 damage at frame 15.
- Shots have a radius of 2 units.
- The angle its shots can deviate while on the ground is 6 degrees.
- The angle its shots can deviate while in the air is 15 degrees.
- The outer reticle immediately expands after jumping. The outer reticle will finish shrinking after 60 frames.
- The chance to shoot towards the outer reticle instead of the inner reticle increases by 2% per shot, and maximizes at a 25% chance to shoot towards the outer reticle.
- This means that it takes 13 shots to reach minimum accuracy.
- When jumping, the chance to shoot towards the outer reticle instead of the inner reticle is immediately set to 40%.
- Accuracy starts recovering 6 frames after the player stops shooting.
- Shots initially travel straight at a rate of 22 units per frame for 4 frames. Shots travel straight for 88 distance units.
- Ink droplets occur every 75 units.
- The frequency at which ink drips from a shot occurs at a rate of 2 droplets per shot.
- There are a total of 5 different droplet patterns that can be created while firing this weapon.
- Droplets that occur within 11 units of the player have a radius of 19.2 units.
- Droplets that occur when they travel past 200 units of the player have a radius of 18 units.
- All other ink droplets have a radius of 13 units.
Version history
Version | Adjustments |
---|---|
2.2.0 |
|
2.7.0 |
|
Quotes
“ | A Shooter modeled after the weapon carried by Elite Octolings. Judd said he found it lying around somewhere. It seems pretty similar to the Tentatek Splattershot... | ” | — In-Game Description(NA)[a]
|
- Notes
- ↑ North America
Gallery
-
Promo image.
-
Octolings holding their trademark weapon, upon which the Octoshot Replica was based.
-
Official art of an Inkling holding the Octoshot Replica.
Demonstration
Splatoon 2
Basic information | |
---|---|
Category | Main |
Class | Shooter |
Sub | Splat Bomb |
Special | Inkjet |
Special points | 200p |
Range | |
Damage | |
Fire rate | |
Requirement | Octo Expansion |
Specifications | |
Base damage | 35 |
Ink consumption | 0.92% |
Other variants | Splattershot Tentatek Splattershot Kensa Splattershot Hero Shot Replica |
The Octo Shot Replica comes with Splat Bombs and Inkjet. The Octo Shot Replica's stats, sub weapon, and special weapon are identical to those of the Tentatek Splattershot. It was released in Version 3.1.0 with the release of the Octo Expansion and can be played in multiplayer after beating the main story of it.
Quick facts
A.k.a.: Octo Shot, Tentatek, T-tek
Strengths: Splatting, mobility, turfing, direct anchor pressure (via Inkjet)
Weakness: Slightly short range compared to some other slayer's weapons
Recommended abilities
Ability | Purpose |
---|---|
Main Power Up | Increases accuracy while either on the ground or in mid-air |
Quick Respawn | Shortens respawn time after getting splatted (under specific conditions) |
Use
- The Octo Shot Replica is a slayer's weapon, designed to splat an opponent in as few as three hits with its rapid firing, good accuracy, and short to medium range.
- Offensively, its good mobility allows its user to force the action and apply pressure onto the opponent, eliminating key defenders during a push.
- Defensively, its rapid rate of fire makes it great at both sharking to pick off unaware opponents and turfing to maintain map control. Its good overall ink efficiency also allows its user to more readily use Splat Bombs to keep opponents at bay.
- Comeback, Quick Respawn, and Stealth Jump are abilities that allow a slayer to play more aggressively.
- Main Power Up can further increase its accuracy, particularly while jumping, preserving more accuracy while jump strafing.
- The Octo Shot Replica is faster and more efficient at turfing than most other slayer's weapons, allowing its user to maintain map control more easily.
- A Splat Bomb detonates one second after touching a surface – more quickly than a Suction Bomb does (in two seconds), but cannot attach to surfaces and, thus, requires more precise aim when thrown. It is a versatile sub weapon with a variety of purposes suited for any slayer:
- Pushing into a Splat Zone or any other important area of the stage.
- Flushing out opposing anchors from perches, hindering their ability to control space with their range.
- Providing space to escape, whether via both swimming and running or via super jumping.
- If piloted properly, the Inkjet can pressure opponents – particularly anchors – more directly than most other slayer's special weapons, such as Tenta Missiles, without committing too far forward:
- Upon activation, its launching point is marked for all players – teammates and opponents – to see and, as of Version 3.2.0, also indicates when its user will return via super jump, allowing an opponent to camp or shark there. Therefore, it is advised to launch the Inkjet from a less visible and better-protected area.
- Drop Roller allows its user to better dodge either a potential Inkjet punish or a simple super jump punish, providing a safer landing.
- Specials are also free ink reloads, allowing the Octo Shot Replica user to drop a Splat Bomb upon landing after the special ends.
- Its movement speed is determined by both the Octo Shot Replica's strafing speed and the number of Run Speed Up ability points equipped.
- Its altitude depends on the elevation of the surface it is hovering above, enabling it to either fly very high over an elevated structure, such as the glass roof in Shellendorf Institute, or hover high enough to challenge an opponent on a perch.
- However, the Inkjet cannot achieve thrust off of grates or mesh, causing its pilot to merely walk on them. Avoid hovering over them to maintain altitude.
- Pressing the button will provide a temporary extra thrust while morphing into squid/octopus form will halt the jets to enable the pilot to descend. Mastery of these maneuvers is necessary for Inkjet pilots to become less predictable for long-ranged opponents to track and pick off.
- Its mobility enables it to reach areas that are otherwise not easily accessible — or even inaccessible, such as over the glass enclosures in Kelp Dome.
- The Inkjet's cannon fires long-ranged, Rainmaker-like bursts of ink that splat opponents in one direct hit or two to four indirect hits:
- Lead the Inkjet's shots to compensate for their slightly slower travel speed, especially when positioned farther from an intended target.
- Its splash damage can splat opponents positioned behind obstacles, varying from 30 to 50 damage; the closer the shot to the opponent, the more damaging.
- If an Inkjet falls out of bounds, such as into the water, its pilot will land back onto the location of launch — or the most previous point of solid ground. Therefore, the Inkjet can save a player from an out-of-bounds splat in a pinch.
- Upon activation, its launching point is marked for all players – teammates and opponents – to see and, as of Version 3.2.0, also indicates when its user will return via super jump, allowing an opponent to camp or shark there. Therefore, it is advised to launch the Inkjet from a less visible and better-protected area.
Countermeasures
- Matchups between Octo Shot Replicas on opposing teams are determined by each player's skill, positioning, turf control, and the presence of any teammates.
- Any weapon that has a combination of longer range, better accuracy, or higher damage output without sacrificing too much mobility can counter an Octo Shot. For example, both the Splattershot Pro and L-3 Nozzlenose and their respective variants meet all of these requirements.
- A long-ranged weapon, such as a charger or most splatlings, can not only attack an Octo Shot from long distance with impunity but also punish a predictable Inkjet. However, once the Octo Shot gets close, the tables are turned, as it can outmaneuver and outdraw its less mobile, slower firing opponent.
- When pursued by an Octo Shot, using almost any sub weapon (except for Squid Beakons) can either delay their pursuit or deter them from chasing. Weapons that track opponents, such as Point Sensors, temporarily prevent them from sharking and makes them an easier target for long-ranged teammates.
- To prevent sharking, keep track of all four members of the opposing team - which ones are still active, which ones are splatted, and which ones Super Jumped back to their spawn point - and turf suspicious puddles of the opponents' ink, preferably with a sub weapon.
- When pursuing an Octo Shot Replica, be wary of any Splat Bombs they might plant while retreating, such as around a corner or after climbing a ledge.
- To punish an opposing Inkjet after it lands, eliminate its pilot's teammates while avoiding both its shots and exhaust before punishing the landing, preferably with a well-placed, well-timed bomb followed by shots from the main weapon. Make sure the opposing pilot does not have Drop Roll, however.
Data
- The Octo Shot Replica is a middleweight weapon.
- The matchmaking range is 125. The game's matchmaking system looks at a team's average matchmaking range value, and matches them against a team with a similar average.
- The ink consumption of 0.92% and ink tank capacity of 100% allows players to fire 108 shots before needing to refill the ink supply.
- This stat can be changed with Ink Saver (Main).
- When initially firing the weapon in humanoid form, the first shot takes 3 frames to come out.
- When firing from swim form, the first shot takes 11 frames to come out.
- The interval between firing and when the player is able to enter swim form or use a sub weapon is 4 frames.
- When firing continuously, it shoots a bullet every 6 frames (10 shots per second).
- When firing while moving, the player's movement speed is set to 0.72 units per frame.
- After firing, there is a 20 frame cooldown before the ink tank starts refilling.
- Each shot has a base damage of 36.
- If a shot is in the air for more than 8 frames after being fired, it loses 0.5625 damage per frame until it reaches 18 damage at frame 40.
- The bullet hitbox has a radius of 2 units.
- The angle its shots can deviate while on the ground is 6 degrees.
- The angle its shots can deviate while in the air is 12 degrees.
- The outer reticle immediately expands after jumping. After 25 frames, the outer reticle will start shrinking, and will finish shrinking after 70 frames.
- The Octo Shot Replica starts off having a 1% chance to shoot towards the outer reticle instead of the inner reticle.
- This chance increases by 1% per shot, and maximizes at a 25% chance to shoot towards the outer reticle, meaning that it takes 24 shots to reach minimum accuracy.
- When jumping, the chance to shoot towards the outer reticle instead of the inner reticle is immediately set to 40%.
- Accuracy starts recovering 6 frames after the player stops shooting. The chance to shoot towards the outer reticle decreases by 1.5% per frame, if the chance is not already at the minimum, meaning that it takes 22 frames to reach maximum accuracy. (32 after shooting while jumping.)
- Shots initially travel straight at a rate of 22 units per frame for 4 frames. Shots travel straight for 88 distance units.
- After that, the shot's velocity is set to 14.495 units per frame if it is not already lower than the listed value, and decreases further as it travels.
- Ink droplets occur every 92 units.
- The frequency at which ink drips from a shot occurs at a rate of 1.5 droplets per shot.
- There are a total of 6 different droplet patterns that can be created while firing this weapon.
- Droplets that occur within 11 units of the player have a radius of 18 units, and a width of 12 units.
- These droplets have their radius multiplied by a value ranging from 1.2 if they fell from a height above 100 units to 1.4 if they fell from a height below 30 units.
- Droplets that occur when they travel past 200 units of the player have a radius of 16 units.
- All other ink droplets have a radius of 12.8 units.
- Droplets that are far from the player and all other droplets have their radius multiplied by a value ranging from 1 if they fell from a height above 100 units to 1.2 if they fell from a height below 30 units.
Version history
Version | Adjustments |
---|---|
Base game |
|
4.2.0 |
|
4.4.0 |
|
4.7.0 |
|
5.0.0 |
|
5.1.0 |
|
5.3.0 |
|
Gallery
-
Promo image.
Demonstration
Trivia
- Template:S2' Octo Shot Replica and the Splattershot Jr. are the only weapons not obtained with cash. Due to this, it is not seen in Ammo Knights in neither Splatoon nor Splatoon 2.
- The Octo Shot Replica is the only weapon given by Judd in Splatoon, the rest of his rewards are gear.
- In Splatoon 2, the Octo Shot Replica along with the Hero weapons can be obtained by Level 1 players that is not the Splattershot Jr.
- This also means the Octo Shot Replica can be obtained before the weapon it is an alternate skin of, being the Tentatek Splattershot.
- This also makes it possible to start playing online without ever using the Splattershot Jr.
- This weapon is tied with the Enperry Splat Dualies, L-3 Nozzlenose D, Ballpoint Splatling, and Tentatek Splattershot for the most expensive Inkjet in the game (200 p).
- in splatoon alphastar 716 got 999999 point of turf n this weapon.
Names in other languages
Language | Name | Meaning |
---|---|---|
Japanese | オクタシューター レプリカ Okutashūtā Repurika |
Octoshooter Replica |
French (NOA) | Liquéfi. octarien (rép.) | |
French (NOE) | Lanceur Octaling (réplique) | Octoling Shooter (replica) |
German | Oktowaffe Replik | Octo Weapon Replica |
Italian | Octosplasher replica | Octosplasher replica |
Russian | Осьмострел (клон) Os'mostrel (klon) |
Octoshot (clone) |
Spanish (NOA) | Pistola octariana réplica | Octarian gun replica |
Spanish (NOE) | Pistola octariana (réplica) | Octarian gun (replica) |